Electric Linear Actuators Jordan Controls announced the LA-2300 Series of electric linear actuators, ideal for slide gates and other powder and bulk handling applications. The series of full-featured actuators are designed for strokes to 36 in. and thrusts to 750 lbf, with drive motors either single or three phase AC. The actuators have a self-locking system to hold last position and prevent backdriving. They may be mounted in any position and will withstand the most adverse environmental conditions. Jordan Controls, (+1) 414-461-9200
circle 176 on reader card

Capacitance Sensors BinMaster's capacitance sensors are available in more than 14 models, 70 different probe assemblies, and eight fitting options. The probes use an integrated circuit design that operates below the radio frequency range, eliminating interference from two-way radios. The Standard 1/2 picofarad sensitivity can be held across the entire operational temperature range, eliminating the need for constant recalibration, according to the manufacturer. Four levels of static discharge protection insure that the unit will continue to function in pneumatically conveyed materials. BinMaster, (+1) 800-278-4241
circle 177 on reader card

Posimetric Feeder Pennsylvania Crusher introduced a new version of the Posimetric Feeder designed for process applications. Using the same operating principle of the larger capacity Posimetric models, this version handles from 1 to 2 tph of any dry bulk solid. Features include a single moving part, one-piece frame construction, no special tools needed for disassembly, and accuracy to 99.5%, according to the company. Pennsylvania Crusher, (+1) 610-544-7200
circle 178 on reader card

Castable Refractory Plibrico Co.'s EXO-SET UNO is a formulated family of single component castable refractories. The refractories are water activated and can be installed by casting, troweling, or tamping with a final set in about two hours, according to the company. They are available in various grades, including EXO-SET UNO 85, and 85% alumina product and EXO-SET UNO 65, a 65% alumina formulation. Plibrico Co., (+1) 800-511-6203
circle 179 on reader card

Modular System GE Fanuc Automation's VersaPoint I/O is a granular I/O product designed for distributed automation system with small but varied I/O requirements. The modular I/O system allows the user to add I/O in 1, 2, 4, 8, or 16 point increments. GE Fanuc Automation, (+1) 804-978-5000
circle 180 on reader card

Portable Compressor The M 22 Mobilair portable compressor from Kaeser Compressors delivers to 75 cfm at 100 psig at 1,120 lb. It is available in sizes ranging from 45 to 1,000 cfm. Standard features are the Sigma Profile airend, Kubota diesel engine, and an instrument and lighting package. The compressors also include a fully galvanized steel canopy, torsion bar suspension system, and oversized tires. Kaeser Compressors, (+1) 800-777-7873
circle 181 on reader card

Reverse Air Dust Collector Camfil Farr's Big Round Filter has a self-contained cleaning system that requires no plant compressed air and a rotating arm. It is available in 21 standard models with a choice of 8-, 10-, or 12-ft fabric bags or pleated filters in a choice of media. A perforated inner core reduces can velocities, according to the manufacturer. A fully welded housing of 7- and 10-gauge metal with a domed roof provides an enclosure designed to withstand 25-in. wg pressure. The collector is equipped with a large ladder and service platform. Camfil Farr, (+1) 800-479-6801
circle 182 on reader card

Point Level Sensor Monitor Technologies' TrueCap Model MK-2e RF capacitance point level sensor is available in a split architecture configuration. It can be used in temperatures to 450° F and high vibration levels. The electronics are located in a separate remote housing. The sensor's sensitivity, fail-safe, and time-delay operation can be adjusted from a remote location. The standard separation distance for the probe and electronics is 12 ft, but longer distances are possible. Monitor Technologies, (+1) 800-601-5953
circle 183 on reader card

Automatic Bag Placer OK International's Sakpak automatic bag placer uses feed and pinch roller technology to pick up an open mouth bag and place it onto an integral clamp ready for filling. It handles a wide range of paper, poly, and woven poly bags. The bag placer is constructed of stainless steel. OK International, (+1) 508-303-8286
circle 184 on reader card