Speed Reducer

Rockwell Automation published a brochure featuring its Dodge Torque-Arm II shaft-mount speed reducer. The 6-page, four-color brochure contains photos of the reducer and its modular accessories. Detailed feature information, capabilities data, and testing and development history are also provided. Rockwell Automation, (+1) 864-281-2171
circle 210 on reader card

Batch System

DustMASTER's brochure features the company's batch systems, which are used to stabilize waste powders and fine materials, converting them into a uniform, non-dusty product. They also are capable of blending multiple waste streams into a stabilized product. A complete system includes a high intensity mixer, weigh batcher, and water system with programmable controls. According to the company, eight sizes are available with production ranging from 8 to 200 tph. For smaller volume stabilization needs, an 8 cu ft paddle mixer is supplied. A cutaway drawing in the brochure shows the Turbin Mixer. Shown and described are the heavy duty cast NiHard steel mixing paddles; replaceable liners with 225 Brinell hardness; rotary distribution system; shock proof v-belt drive; load cells; totally enclosed, fan cooled heavy duty motor; and safety interlock system. One section covers the company's performance guarantee and offers a free test of materials to determine results. DustMASTER Enviro Systems, (+1) 262-691-3100
circle 211 on reader card

Grinding Aids

AXIM's brochure features its grinding aids product line: AXIM-155 (Glycol), AXIM-5904 (Amine and Glycol), AXIM-5905 (Amine Acetate), and AXIM-2000 (Amine Phenolate). Also highlighted is the company's line of high performance products: AXIM-2000 GA (Amine Phenolate with strength enhancer), AXIM-2000 GB (Amine Phenolate with throughput enhancer), and AXIM-155 SPD (Glycol with set time enhancer). All products meet ASTM C-465 specifications. AXIM, (+1) 330-986-0444
circle 212 on reader card

Belt Conveyor Standard

The Conveyor Equipment Manufacturers Association (CEMA) published a new standard, No. 575-2000, Bulk Material Belt Conveyor Impact Bed/Cradle. The standard deals with selection and dimensions for impact bed/cradles, which are used to reduce premature idler failure and reduce belt damage. Pricing information and an order form are available from CEMA's web site (www.cemanet.org). CEMA, (+1) 941-514-3441
circle 213 on reader card

Conveyor Products

Flexco's 20-page color catalog gives full specifying information on a variety of belt conveyor products and accessories. The company's Eliminator belt cleaners, Persuader PT Max and PT Smart belt trainers, and Deflector belt plows are featured in the catalog. Belt cleaner and accessory product sections include complete size and ordering number charts. The catalog concludes with a brief overview of five other belt maintenance solutions, including rivet- and bolt-attached mechanical conveyor-belt fasteners for heavy duty bulk handling conveyor applications; a hand tool for skiving belt ends to countersink mechanical fasteners flush with belt cover surface; and Flex-Leg ceramic-tile and rubber pulley lagging. Flexco, (+1) 630-971-0150
circle 214 on reader card

Telemetry Systems

Wireless Data Corp's brochure offers application information and specifications on digital FSK telemetry systems for obtaining strain gage sensor data from rotary shafts to 42 in. in diameter. The wireless system collects multiple channels from dc to 1,000 Hz without using slip rings, bearings, or brushes. The transmitter components are designed for high G forces on shafts to 12,000 rpm in high temperature and vibration environments. Wireless Data Corp., (+1) 800-227-8190
circle 215 on reader card

Controller Solutions

GE Fanuc Automation offers a full-color controller solutions brochure detailing the company's complete line of PLCs, I/O devices, software, and integrated systems. Products featured in the brochure include Series 90-70, Series 90-30, VersaMax Micro and Nano PLCs controllers; and Genius, VersaMax I/O, Field Control, and busstop I/O devices. Programming software such as VersaPro, LogicMaster 90, State Logic, and Cscape is highlighted, as well as fxControl software and bundled hardware and software systems. The brochure also includes information about the company's short- and long-term technical support; product training conducted by factory-trained technical instructors; and consulting services that aid in the evaluation, design, planning, integration, and support of the controller solution. GE Fanuc Automation, (+1) 804-978-5000
circle 216 on reader card

Gas Conditioning

A six-page, four-color bulletin, entitled “Gas Conditioning in Portland Cement Manufacturing,” is available from Spraying Systems Co. The bulletin features the company's line of FloMax nozzles designed for gas cooling and conditioning. FloMax nozzle capacities range from .5 to 50 gpm and have two spray angle options, 55° and 20°. Flowback nozzles are included in the bulletin as well. Flowback nozzles feature a two-piece design and offer the largest selection of nozzle capacities available, according to the company. The bulletin also highlights educational resources and selection tools available, including the FloMax selection questionnaire, FloMax Air Atomizing Nozzles Performance Data Pak, and the Flowback Nozzle Performance Data Reference Manual. Spraying Systems, (+1) 800-95-SPRAY
circle 2170 on reader card

Dust Management

An eight-page brochure discusses the Dust Management program offered through an alliance of Martin Engineering and ONDEO Nalco Co. The program combines Martin Engineering's “pyramid approach” for the control of fugitive material through containment, collection, and suppression, and ONDEO Nalco's DustFoam fugitive dust control agent. In the program, Martin Engineering will develop and manufacture application equipment for use with ONDEO Nalco dust suppression chemicals. ONDEO Nalco will handle formulation, manufacture, and supply of chemicals; Martin Engineering's Martin Services group will provide installation and maintenance of application equipment. Martin Engineering, (+1) 309-594-2384
circle 218 on reader card

Air Pollution Control

This 16-page product and capabilities brochure describes a line of dust, mist, and fume collectors for air pollution control and product recovery. The brochure describes features, benefits, and applications for this equipment, including the recently introduced Gold Series cartridge cooler and Big Round Filter reverse air dust collector. Also detailed are the company's customer service program, R&D and engineering support and full-service laboratory. Camfill Farr, (+1) 800-479-6801
circle 219 on reader card