"Methods, Impacts, and Opportunities in the Concrete Building Life Cycle" provides a comprehensive analysis that advances three key areas relevant to the buildings LCA field: methodology, benchmarking, and impact-reduction opportunities. The study is a major development for construction-related, life-cycle assessment as it thoroughly examines all phases of the complete life cycle of a building—from acquisition of materials to construction, the use of the building, and finally demolition and end of life.
“Most environmental assessments do not move beyond the construction phase and only provide a partial picture of the full impact a particular material can have on a building. This is short-sighted,” said David Shepherd, director of sustainable development for Portland Cement Association. “The heating, cooling, and general operations of buildings and homes in the United States account for approximately 70% of national energy consumption each year, and an accurate LCA needs to include the operational phase.”
Concrete has largely been chosen as a building material for its structural properties rather than its energy-saving properties. Although sustainable builders have known the thermal mass attributes of concrete significantly reduce heating and cooling needs, the energy consumption required to produce its key ingredient, cement, has raised questions about its environmental viability. In its environmental assessment, MIT researchers found concrete homes produce lower greenhouse gas emissions than current best practice code—compliant wood-frame residences throughout a 60-year service life.
Concrete homes did have a higher embodied global warming potential (GWP) associated with the pre-use phase of LCA when raw materials are harvested and turned into construction materials, transported to the site, and assembled into the finished home. However, this phase accounts for only about 2% to 12% of the overall global warming potential for the life of the home. For the 60-year period of the study, houses constructed with insulated concrete forms have 5% to 8% lower GWP than current code-compliant, light frame wood houses, based on greater thermal mass and higher R-values. Researchers found similar results when evaluating multifamily residences.
Commercial office buildings built with a concrete structural frame produce slightly less greenhouse gas emissions over a 60-year service life than commercial structures built with steel frames, based on the results of the comprehensive MIT assessment.
MIT researchers then evaluated strategies to lower a concrete building’s carbon footprint and overall environmental impact. A major advancement was the incorporation of a cost-impact analysis to determine whether or not a given environmental reduction strategy made economic sense. Among the strategies evaluated, the two that reduced embodied emissions—increased fly ash and reducing the thickness of concrete walls from a 6-in. to a 4-in. concrete core—were found to be both economical and effective ways to reduce emissions. More information can be found at: http://web.mit.edu/cshub/